<& /components/TrackPage.mhtml, version=>'2', new=>'2005-05-15', updated=>'2005-08-22', license=>'CC-NC-SA', author=>'Richard Welty', owner=>'Krusty Motorsports, Limited', date=>'2005', oval=>'', road=>'paved,temp,inactive', drag=>'', kart=>'', offroad=>'', adBeforeTOC => '', trackName => 'Hutchinson Sunflower Aerodrome', trackStreetAddr => '', trackCityState => 'Yoder, KS', trackZip => '67501', introduction => ' was an airport course located in Yoder, KS, 8 miles south of Hutchinson, on the runways of the old Hutchinson Naval Air Station. It was used by SCCA Club Racing until the early 1990s. The facility now serves as a gliderport and industrial park.

This page was contributed by Guy Watney, Kansas City Region SCCA.

', trackOffice => '', mapService => '', foodService => 'Yahoo', hotelService => 'Yahoo', timeZone => 'CST/CDT (-0600/-0500)', trackMap => ' Several course configurations were used over the years. As the runway surface deteriorated, the track had to be re-routed to avoid bumps and potholes. One 2.6 mile configuration was as follows:

', trackImage => '', terraServerLink => ' http://terraserver.microsoft.com/image.aspx?T=1&S=13&Z=14&X=372&Y=2623&W=1' , historicalNote => '', weatherID => 'USKS0635', weatherZIP => '', officialWebSite => '', schedulePage => '', resultsPage => '', ticketsPage => '', gettingThere => '', racersGuide => '', hotLap => '', workersGuide => '', foodInsert => '', hotelInsert => '', TOCInsertLink1 => '', TOCInsertText1 => '', TOCInsertLink2 => '', TOCInsertText2 => '', TOCInsertLink3 => '', TOCInsertText3 => '', TOCInsertLink4 => '', TOCInsertText4 => '', TOCInsertLink5 => '', TOCInsertText5 => '', TOCInsertLink6 => '', TOCInsertText6 => '', offsiteTOCInsertLink1 => '', offsiteTOCInsertText1 => '', offsiteTOCInsertLink2 => '', offsiteTOCInsertText2 => '', offsiteTOCInsertLink3 => '', offsiteTOCInsertText3 => '', offsiteTOCInsertLink4 => '', offsiteTOCInsertText4 => '', offsiteTOCInsertLink5 => '', offsiteTOCInsertText5 => '', offsiteTOCInsertLink6 => '', offsiteTOCInsertText6 => '', &>